View 15-215-G7C-BN1P2B-2T_1230517.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

lifecyclephase: revision : 1 expired period: forever release date:2008-09-20 00:15:55.0 everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everlight.com rev 1 page: 1 of 11 device no:dse-155-g01 prepared date: 19-mar-2007 prepared by: ashley kuo technical data sheet 1206 package chip led (0.5mm height) 15-215/g7c-bn1p2b/2t features ? package in 8mm tape on 7 ? diameter reel. ? compatible with automatic placement equipment. ? compatible with infrared and vapor phase reflow solder process. ? mono-color type. ? pb-free. ? the product itself will remain within rohs compliant version. descriptions ? the 15-215 smd taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ? besides, lightweight makes them ideal for miniature applications. etc. applications ? backlighting in dashboard and switch. ? telecommunication: indicator and backlighting in telephone and fax. ? flat backlight for lcd, switch and symbol. ? general use. device selection guide chip part no. material emitted color resin color ($#/1#5 algainp brilliant yellow green water clear
lifecyclephase: revision : 1 expired period: forever release date:2008-09-20 00:15:55.0 everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everlight.com rev 1 page: 2 of 11 device no:dse-155-g01 prepared date: 19-mar-2007 prepared by: ashley kuo 15-215/g7c-bn1p2b/2t package outline dimensions note: the tolerances unless mentioned is ? 0.1mm,unit = mm
lifecyclephase: revision : 1 expired period: forever release date:2008-09-20 00:15:55.0 everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everlight.com rev 1 page: 3 of 11 device no:dse-155-g01 prepared date: 19-mar-2007 prepared by: ashley kuo 15-215/g7c-bn1p2b/2t absolute maximum ratings (ta=25
) parameter symbol rating unit reverse voltage v r 5 v forward current i f 25 ma peak forward current (duty 1/10 @1khz) i fp 60 ma power dissipation pd 60 mw electrostatic discharge(hbm) esd 2000 v operating temperature topr -40 ~ +85
storage temperature tstg -40 ~ +90
soldering temperature tsol reflow soldering : 260
for 10 sec. hand soldering : 350
for 3 sec.
lifecyclephase: revision : 1 expired period: forever release date:2008-09-20 00:15:55.0 everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everlight.com rev 1 page: 4 of 11 device no:dse-155-g01 prepared date: 19-mar-2007 prepared by: ashley kuo 15-215/g7c-bn1p2b/2t electro-optical characteristics (ta=25
) parameter symbol min. typ. max. unit condition luminous intensity iv 28.5 ----- 72.0 mcd i f =20ma viewing angle 2 1/2 ----- 140 ----- deg i f =20ma peak wavelength ? p ----- 575 ----- nm i f =20ma dominant wavelength ? d 567.5 ----- 575.5 nm i f =20ma spectrum radiation bandwidth ?? ----- 20 ----- nm i f =20ma forward voltage v f 1.75 ----- 2.35 v i f =20ma reverse current i r ----- ----- 10 ? a v r =5v notes: 1.tolerance of luminous intensity ? 11% 2.tolerance of dominant wavelength ? 1nm 3.tolerance of forward voltage ? 0.1v
lifecyclephase: revision : 1 expired period: forever release date:2008-09-20 00:15:55.0 everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everlight.com rev 1 page: 5 of 11 device no:dse-155-g01 prepared date: 19-mar-2007 prepared by: ashley kuo 15-215/g7c-bn1p2b/2t bin range of dom. wavelength group bin min max unit condition c15 567.5 569.5 c16 569.5 571.5 c17 571.5 573.5 b c18 573.5 575.5 nm i f =20ma bin range of luminous intensity bin min max unit condition n1 28.5 36.0 n2 36.0 45.0 p1 45.0 57.0 p2 57.0 72.0 mcd i f =20ma bin range of forward voltage group bin min max unit condition 0 1.75 1.95 1 1.95 2.15 b 2 2.15 2.35 v i f =20ma notes: 1.tolerance of luminous intensity ? 11% 2.tolerance of dominant wavelength ? 1nm 3.tolerance of forward voltage ? 0.1v
lifecyclephase: revision : 1 expired period: forever release date:2008-09-20 00:15:55.0 everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everlight.com rev 1 page: 6 of 11 device no:dse-155-g01 prepared date: 19-mar-2007 prepared by: ashley kuo 15-215/g7c-bn1p2b/2t typical electro-optical characteristics curves
lifecyclephase: revision : 1 expired period: forever release date:2008-09-20 00:15:55.0 everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everlight.com rev 1 page: 7 of 11 device no:dse-155-g01 prepared date: 19-mar-2007 prepared by: ashley kuo 15-215/g7c-bn1p2b/2t label explanation cat: luminous intensity rank hue: dom. wavelength rank ref: forward voltage rank reel dimensions note: the tolerances unless mentioned is ? 0.1mm ,unit = mm
lifecyclephase: revision : 1 expired period: forever release date:2008-09-20 00:15:55.0 everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everlight.com rev 1 page: 8 of 11 device no:dse-155-g01 prepared date: 19-mar-2007 prepared by: ashley kuo 15-215/g7c-bn1p2b/2t carrier tape dimensions: loaded quantity 2000 pcs per reel note: the tolerances unless mentioned is ? 0.1mm ,unit = mm moisture resistant packaging label desiccant label aluminum moisture-proof bag
lifecyclephase: revision : 1 expired period: forever release date:2008-09-20 00:15:55.0 everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everlight.com rev 1 page: 9 of 11 device no:dse-155-g01 prepared date: 19-mar-2007 prepared by: ashley kuo 15-215/g7c-bn1p2b/2t reliability test items and conditions the reliability of products shall be satisfied with items listed below. confidence level j 90% ltpd j 10% no. items test condition test hours/cycles sample size ac/re 1 reflow soldering temp. : 260
? 5
min. 5sec. 6 min. 22 pcs. 0/1 2 temperature cycle h : +100
15min 5 min l : -40
15min 300 cycles 22 pcs. 0/1 3 thermal shock h : +100
5min 10 sec l : -10
5min 300 cycles 22 pcs. 0/1 4 high temperature storage temp. : 100
1000 hrs. 22 pcs. 0/1 5 low temperature storage temp. : -40
1000 hrs. 22 pcs. 0/1 6 dc operating life i f = 20 ma 1000 hrs. 22 pcs. 0/1 7 high temperature / high humidity 85
/ 85%rh 1000 hrs. 22 pcs. 0/1
lifecyclephase: revision : 1 expired period: forever release date:2008-09-20 00:15:55.0 everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everlight.com rev 1 page: 10 of 11 device no:dse-155-g01 prepared date: 19-mar-2007 prepared by: ashley kuo 15-215/g7c-bn1p2b/2t precautions for use 1. over-current-proof customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( burn out will happen ). 2. storage 2.1 do not open moisture proof bag before the products are ready to use. 2.2 before opening the package: the leds should be kept at 30
or less and 90%rh or less. 2.3 after opening the package: the led's floor life is 1 year under 30
or less and 60% rh or less. if unused leds remain, it should be stored in moisture proof packages. 2.4 if the moisture absorbent material (silica gel) has faded away or the leds have exceeded the storage time, baking treatment should be performed using the following conditions. baking treatment : 60 ? 5
for 24 hours. 3. soldering condition 3.1 pb-free solder temperature profile 3.2 reflow soldering should not be done more than two times. 3.3 when soldering, do not put stress on the leds during heating. 3.4 after soldering, do not warp the circuit board.
lifecyclephase: revision : 1 expired period: forever release date:2008-09-20 00:15:55.0 everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everlight.com rev 1 page: 11 of 11 device no:dse-155-g01 prepared date: 19-mar-2007 prepared by: ashley kuo 15-215/g7c-bn1p2b/2t 4.soldering iron each terminal is to go to the tip of soldering iron temperature less than 350
for 3 seconds within once in less than the soldering iron capacity 25w. leave two seconds and more intervals, and do soldering of each terminal. be careful because the damage of the product is often started at the time of the hand solder. 5.repairing repair should not be done after the leds have been soldered. when repairing is unavoidable, a double-head soldering iron should be used (as below figure). it should be confirmed beforehand whether the characteristics of the leds will or will not be damaged by repairing. everlight electronics co., ltd. tel: 886-2-2267-2000, 2267-9936 office: no 25, lane 76, sec 3, chung yang rd, fax: 886-2267-6244, 2267-6189, 2267-6306 tucheng, taipei 236, taiwan, r.o.c http://www.everlight.com

▲Up To Search▲

Price & Availability of 15-215-G7C-BN1P2B-2T

	To Download 15-215-G7C-BN1P2B-2T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .